The Powercore Olympic Bar 680kg is a high quality Olympic Weight Lifting Bar. It is a whippy bar, ideal for Olympic lifts, equipped with 6 high quality needle bearings
P/CORE: WEIGHTLIFTING OLYMPIC BAR 6.0 [BLUE] (MAX LOAD: 680kg)
Out of stock
- Additional information
- What Customers Think
- Types of Materials Olympic Bars can be made from
- Reviews (0)
The Powercore 680kg Olympic Bar is a high end olympic bar suitable for Olympic Lifting, Crossfit and Powerlifting, which includes 6x Needle bearings.
Made from only the best High Alloy steel, this bar can take a maximum load of an incredible 680kg, with a tensile strength of 185,000 psi.
This olympic bar comes with dual knurl marks making it suitable for both Olympic Lifting and Powerlifting. The knurl is incredibly comfortable, and spreads right to the sleeves.
The most important things to look out for on a good olympic lifting bar is:
1. Steel Used on the handle
2. What makes up the inside of the sleeve, i.e. Brass Bushing & Needle Bearings.
The above two components is what seperates a good bar from an average or bad bar.
Dual Knurl Marks
Black Oxide including Sleeves
1 Year Warranty on bar, 2 Year Warranty, 6 Month Warranty, 6 Month Warranty on Bearings
6x Needle Bearings with Brass Bushings & Snap Ring Design
|Suitable for Dropping||
Crossfit / Olympic Lifting, General Use (Bench Press etc)
What Customers Think
What customers think of this bar:
“I am happy to say that the equipment I purchased from you is of the highest quality and has withstood all the punishment I have put it through.
I have trained at the top powerlifting gyms in SA and have used the best bars and weights and the equipment you supplied matches those brands any day!
From throwing 300kg around to failing and dropping 260kg off my back, the equipment is still in perfect condition and the bar is living up to its name of being able to carry 600kg.” – Mohammed-Raees Dangor (World Record Holder GPC – 6 South African Records – Best overall Junior Weight Lifter in SA Title)
Recommended Maintenance of a Black Oxide Olympic Bar:
1) Use a plastic bristle brush and a mild detergent to clean the knurl – This is just like cleaning the leaves out of your gutter, if you leave them in there bad things happen.
2) Wipe down with 3:1 oil and brush into the knurl with plastic bristle brush. The steel will soak the oil in and the bar will stay healthy.
3) Wipe off any excess oil with a dry towel.
4) Frequency will be based on climate
What to expect over time:
1) The bar will most likely get a patina over time.
2) Barbell will last a lifetime
We have not encountered many problems with our olympic bars, when we have it has been found that there has been misuse. I.e Olympic Bar being dropped on incorrect flooring, not using bumper plates, dropping the bar on safety pins etc. The warranty is only valid if the Olympic Bar is using on an a lifting platform when the rubber flooring is at least 25mm thick. Olympic Bars must also be used with Olympic Bumper Plates if there is any dropping whatsoever. To ensure longevity of your Olympic Bar, don’t drop it unnecessarily. If any of the above is not adhered to, the warranty is void, and it will limit the lifespan of your Olympic Bar.
Types of Materials Olympic Bars can be made from
Different Types of steel used to make an Olympic Bar:
Q235: Low Grade Steel, used for entry level olympic bars, i.e. olympic bars for Bench Press etc. These bars are suitable for a normal gym environment, however powerlifters who are moving heavy weight will require an olympic bar made from either Spring Steel or High Alloy Steel. When this bar bends, it does not go back straight like a High Alloy Steel bar would.
Spring Steel: Mid Grade Steel. The majority of “good” olympic bars are made from spring steel, and is therefore suitable for powerlifting use.
High Alloy: High Grade Steel. High Alloy Steel is exceptionally high quality, and is therefore the steel of choice for high end Olympic Lifting & Powerlifting bars. This is the steel of choice for all our Powercore Olympic Lifting Bars.